AJS Metal Polish: Frequently Asked Questions
This page is for practical questions and troubleshooting about AJS Metal Polish. For a broader guide to preparing and polishing vehicle metal, see How to Polish Metal. Product suitability and directions can vary with the metal and its finish, so use the current product label as your final guide.
Common Metal Polish Questions
Which metals does AJS Metal Polish list?
The current product page names aluminium, chrome, stainless steel and brass, subject to the product label and the surface finish. Check carefully before using it on a coated or plated surface. If the finish is unknown, ask its maker or test only as directed by the product label.
What does the polish do?
The current product description says AJS Metal Polish helps remove oxidation and surface haze from dull or tarnished polished metal and restore a reflective finish. It does not promise to repair deep scratches or restore damaged plating.
Will it remove scratches?
The current product information does not claim scratch repair. Treat a scratch as a separate surface condition, not as something this polish is guaranteed to remove. If a mark is deep, catches a fingernail, or appears to go through the finish, seek advice from a qualified repairer before polishing it.
Does it leave a protective coating?
The current product information gathered for this guide describes cleaning, oxidation and surface haze removal, and a reflective finish. It does not substantiate a nano protective layer or a defined period of protection, so this guide makes neither promise.
How do I apply it?
Apply a small amount to a microfibre towel, applicator pad or suitable polishing wheel. Work it into the metal with firm, overlapping pressure, then buff away residue with a clean, dry microfibre cloth. Follow the supplied label and check surface suitability first.
Can I use it on plated or coated trim?
Do not assume that polished metal, plated metal and coated trim are interchangeable. The current instructions specifically say to check suitability for coated or plated surfaces before use. Follow the surface maker guidance if it is available.
How often should I polish?
The current product instructions do not set a fixed interval. Inspect the finish and follow the care instructions for the part. Use the product when the metal needs attention, rather than following an unsupported calendar schedule.
Can I use a machine?
The product instructions mention a suitable polishing wheel as one application option. Use only equipment and materials appropriate for the surface, and follow the instructions supplied with both the product and tool. If the finish is delicate or unfamiliar, pause and get surface specific advice.
Where can I find the product details?
Read the current directions and suitability notes on the AJS Metal Polish product page. For the broader preparation and polishing sequence, continue to the metal care guide.
